First sketch of the new Peugeot ADV revealed

It seems that the approach of the scooter SUV is gaining momentum. Ranging from the pioneers like the Honda X-ADV that was launched before anyone and made a huge wave with ADV150 and the latest with ADV350 until other manufacturers Must jump to jam in this new segment a lot.  And one of those who will join the SUV segment is French automaker Peugeot. Which is another manufacturer from the European side that has expertise in scooters no less than anyone. Recently, the camp has published an official sketch of a new product in the Scooter SUV line, for which the official model name has not yet been revealed. But when looking at the picture, it was found that the car should be able to carry the ability to use that is superior to its competitors.  The styling of the Peugeot car might not look very different from its competitors in the current market, where Honda stands in three sizes, excluding other manufacturers such as Kymco and European manufacturer Aprilia. SR GT200 that is classified in the same Segent, but if you go into details, you will find that the car is quite different. lined up from the front and rear wheel rims on the car Will find a wheel with spokes, which are not the same size. Visually, you'll find a 16-inch front rim and a 13-inch rear rim. The angle of the spokes is pretty clear that it's specifically designed to disperse the force. And should have better performance than competitors in Off-Road usage  e395a480b2743f2e28b4ddca9a1a4496.jpg  The other part seems to be superior. is the body design It can be seen that the car has a height from the floor to the bottom of the machine than anyone. At the front, you will find the fairing that extends outward. with part of the front fender near the wheel The handlebar position is placed higher with the addition of a handlebar doll. Makes the overview of the car look very interesting. But what is questionable is the exhaust design. Looking at the path pipe placement and the angle of the end of the exhaust pipe. May not look different or suitable for how much use  Let's take a look at the equipment installed on the car a bit. The car comes with an upside-down front suspension with a monoshock rear suspension placed under the seat. which seems consistent with a wide range of applications The front brake system is dual disc brakes with radial mount brakes, while the rear is a single large disc and a 1-port brake pump.  2020 Peugeot Metropolis, the new French trike launched Peugeot Metropolis  As for the main engine for this model, There is no official confirmation from the manufacturer yet. But when we consider the equipment installed on the car It is also possible that Peugeot will use the PowerMotion 400 cc 1-cylinder SOHC engine stationed on the Peugeot Metropolis three-wheel scooter model. Following this, the car comes with a maximum power of 35.6 horsepower (HP) at 7250 rpm and a maximum torque of 38.1 Nm at 5750 rpm.  An overview of the design work It is very interesting. From the pictures we see, the car looks like the design has been completed. because there are both attached to the license plate Turn signals, rear view mirrors, etc. that look ready for mass production for commercial distribution. So we will have to wait for another official announcement. That the car will come in what model code and how will there be official specs?`

It seems that the approach of the scooter SUV is gaining momentum. Ranging from the pioneers like the Honda X-ADV that was launched before anyone and made a huge wave with ADV150 and the latest with ADV350 until other manufacturers Must jump to jam in this new segment a lot.

And one of those who will join the SUV segment is French automaker Peugeot. Which is another manufacturer from the European side that has expertise in scooters no less than anyone. Recently, the camp has published an official sketch of a new product in the Scooter SUV line, for which the official model name has not yet been revealed. But when looking at the picture, it was found that the car should be able to carry the ability to use that is superior to its competitors.

It seems that the approach of the scooter SUV is gaining momentum. Ranging from the pioneers like the Honda X-ADV that was launched before anyone and made a huge wave with ADV150 and the latest with ADV350 until other manufacturers Must jump to jam in this new segment a lot.  And one of those who will join the SUV segment is French automaker Peugeot. Which is another manufacturer from the European side that has expertise in scooters no less than anyone. Recently, the camp has published an official sketch of a new product in the Scooter SUV line, for which the official model name has not yet been revealed. But when looking at the picture, it was found that the car should be able to carry the ability to use that is superior to its competitors.  The styling of the Peugeot car might not look very different from its competitors in the current market, where Honda stands in three sizes, excluding other manufacturers such as Kymco and European manufacturer Aprilia. SR GT200 that is classified in the same Segent, but if you go into details, you will find that the car is quite different. lined up from the front and rear wheel rims on the car Will find a wheel with spokes, which are not the same size. Visually, you'll find a 16-inch front rim and a 13-inch rear rim. The angle of the spokes is pretty clear that it's specifically designed to disperse the force. And should have better performance than competitors in Off-Road usage  e395a480b2743f2e28b4ddca9a1a4496.jpg  The other part seems to be superior. is the body design It can be seen that the car has a height from the floor to the bottom of the machine than anyone. At the front, you will find the fairing that extends outward. with part of the front fender near the wheel The handlebar position is placed higher with the addition of a handlebar doll. Makes the overview of the car look very interesting. But what is questionable is the exhaust design. Looking at the path pipe placement and the angle of the end of the exhaust pipe. May not look different or suitable for how much use  Let's take a look at the equipment installed on the car a bit. The car comes with an upside-down front suspension with a monoshock rear suspension placed under the seat. which seems consistent with a wide range of applications The front brake system is dual disc brakes with radial mount brakes, while the rear is a single large disc and a 1-port brake pump.  2020 Peugeot Metropolis, the new French trike launched Peugeot Metropolis  As for the main engine for this model, There is no official confirmation from the manufacturer yet. But when we consider the equipment installed on the car It is also possible that Peugeot will use the PowerMotion 400 cc 1-cylinder SOHC engine stationed on the Peugeot Metropolis three-wheel scooter model. Following this, the car comes with a maximum power of 35.6 horsepower (HP) at 7250 rpm and a maximum torque of 38.1 Nm at 5750 rpm.  An overview of the design work It is very interesting. From the pictures we see, the car looks like the design has been completed. because there are both attached to the license plate Turn signals, rear view mirrors, etc. that look ready for mass production for commercial distribution. So we will have to wait for another official announcement. That the car will come in what model code and how will there be official specs?

The styling of the Peugeot car might not look very different from its competitors in the current market, where Honda stands in three sizes, excluding other manufacturers such as Kymco and European manufacturer Aprilia. SR GT200 that is classified in the same Segent, but if you go into details, you will find that the car is quite different. 

lined up from the front and rear wheel rims on the car Will find a wheel with spokes, which are not the same size. Visually, you'll find a 16-inch front rim and a 13-inch rear rim. The angle of the spokes is pretty clear that it's specifically designed to disperse the force. And should have better performance than competitors in Off-Road usage

The other part seems to be superior. is the body design It can be seen that the car has a height from the floor to the bottom of the machine than anyone. At the front, you will find the fairing that extends outward. with part of the front fender near the wheel The handlebar position is placed higher with the addition of a handlebar doll. Makes the overview of the car look very interesting.

It seems that the approach of the scooter SUV is gaining momentum. Ranging from the pioneers like the Honda X-ADV that was launched before anyone and made a huge wave with ADV150 and the latest with ADV350 until other manufacturers Must jump to jam in this new segment a lot.  And one of those who will join the SUV segment is French automaker Peugeot. Which is another manufacturer from the European side that has expertise in scooters no less than anyone. Recently, the camp has published an official sketch of a new product in the Scooter SUV line, for which the official model name has not yet been revealed. But when looking at the picture, it was found that the car should be able to carry the ability to use that is superior to its competitors.  The styling of the Peugeot car might not look very different from its competitors in the current market, where Honda stands in three sizes, excluding other manufacturers such as Kymco and European manufacturer Aprilia. SR GT200 that is classified in the same Segent, but if you go into details, you will find that the car is quite different. lined up from the front and rear wheel rims on the car Will find a wheel with spokes, which are not the same size. Visually, you'll find a 16-inch front rim and a 13-inch rear rim. The angle of the spokes is pretty clear that it's specifically designed to disperse the force. And should have better performance than competitors in Off-Road usage  e395a480b2743f2e28b4ddca9a1a4496.jpg  The other part seems to be superior. is the body design It can be seen that the car has a height from the floor to the bottom of the machine than anyone. At the front, you will find the fairing that extends outward. with part of the front fender near the wheel The handlebar position is placed higher with the addition of a handlebar doll. Makes the overview of the car look very interesting. But what is questionable is the exhaust design. Looking at the path pipe placement and the angle of the end of the exhaust pipe. May not look different or suitable for how much use  Let's take a look at the equipment installed on the car a bit. The car comes with an upside-down front suspension with a monoshock rear suspension placed under the seat. which seems consistent with a wide range of applications The front brake system is dual disc brakes with radial mount brakes, while the rear is a single large disc and a 1-port brake pump.  2020 Peugeot Metropolis, the new French trike launched Peugeot Metropolis  As for the main engine for this model, There is no official confirmation from the manufacturer yet. But when we consider the equipment installed on the car It is also possible that Peugeot will use the PowerMotion 400 cc 1-cylinder SOHC engine stationed on the Peugeot Metropolis three-wheel scooter model. Following this, the car comes with a maximum power of 35.6 horsepower (HP) at 7250 rpm and a maximum torque of 38.1 Nm at 5750 rpm.  An overview of the design work It is very interesting. From the pictures we see, the car looks like the design has been completed. because there are both attached to the license plate Turn signals, rear view mirrors, etc. that look ready for mass production for commercial distribution. So we will have to wait for another official announcement. That the car will come in what model code and how will there be official specs?

But what is questionable is the exhaust design. Looking at the path pipe placement and the angle of the end of the exhaust pipe. May not look different or suitable for how much use

Let's take a look at the equipment installed on the car a bit. The car comes with an upside-down front suspension with a monoshock rear suspension placed under the seat. which seems consistent with a wide range of applications The front brake system is dual disc brakes with radial mount brakes, while the rear is a single large disc and a 1-port brake pump.

2020 Peugeot Metropolis, the new French trike launched

Peugeot Metropolis

As for the main engine for this model, There is no official confirmation from the manufacturer yet. But when we consider the equipment installed on the car It is also possible that Peugeot will use the PowerMotion 400 cc 1-cylinder SOHC engine stationed on the Peugeot Metropolis three-wheel scooter model. Following this, the car comes with a maximum power of 35.6 horsepower (HP) at 7250 rpm and a maximum torque of 38.1 Nm at 5750 rpm.

An overview of the design work It is very interesting. From the pictures we see, the car looks like the design has been completed. because there are both attached to the license plate Turn signals, rear view mirrors, etc. that look ready for mass production for commercial distribution. So we will have to wait for another official announcement. That the car will come in what model code and how will there be official specs?

No comments:

Please do not comment any spam links here, Thank you!

Powered by Blogger.